Subscribe to Our Youtube Channel
Related Manuals for Titan TTB281GRD
Summary of Contents for Titan TTB281GRD
- Page 1 SAFETY AND OPERATING MANUAL Original instructions(V3.0) ANGLE GRINDER 750W TTB281GRD...
- Page 2 Congratulations on your purchase of a power tool from Titan Power Tools (UK) Ltd. We want you to continue getting the best performance from it so this handbook includes information on safety, handling and care. Please retain this handbook in case you need to refer to any of the information in the future.
-
Page 3: General Safety Instructions
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. ANGLE GRINDER 750W TTB281GRD... - Page 4 d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
-
Page 5: Angle Grinder Safety Warnings
Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and shock the operator. ANGLE GRINDER 750W TTB281GRD... - Page 6 k) Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory. l) Never lay the power tool down until the accessory has come to a complete stop.
- Page 7 9. When the disc is installed, run it for at least one minute to ensure that it does not have a fault. It is always advisable to stay out of the line of the disc when testing or in general in use. ANGLE GRINDER 750W TTB281GRD...
- Page 8 10. Do not use a disc marked with a lower RPM than that of the no load speed shown on the rating plate. 11. Use discs only of the prescribed diameter. 12. Do not use the angle grinder for buffing or polishing under any circumstances. 13.
- Page 9 Please always work with approved safety equipment, such as those dust masks that specially designed to filter out microscopic particles and use the dust extraction facility at all time. For more information please see the HSE website: http://www.hse.gov.uk/construction or http://www.hse.gov.uk/pubns/cis69.pdf ANGLE GRINDER 750W TTB281GRD...
- Page 10 VIBRATION The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool.
-
Page 11: Important Note
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Wear ear protection Wear eye protection Wear dust mask Wear protective gloves Double insulation Conformity to CE directive yyWxx Manufacturing date code; year of manufacturing (20yy) and week of manufacturing (Wxx); ANGLE GRINDER 750W TTB281GRD... - Page 12 1 Spindle lock button 2 Double action on/off switch 3 Auxiliary handle 4 Cutting guard 5 Cutting disc 6 Guard release lever 7 Grinding guard 8 Spanner...
-
Page 13: Technical Data
A weighted sound pressure 89.2dB(A) / KpA: 3dB(A) A weighted sound power 100.2dB(A) / KwA: 3dB(A) Wear ear protection when sound pressure is over 80dB ACCESSORIES Auxiliary handle Spanner 115mm cutting guard 115mm grinding guard 115mm metal cutting disc ANGLE GRINDER 750W TTB281GRD... -
Page 14: Intended Use
OPERATIONS INSTRUCTIONS Note: Before using the tool, read the instruction book carefully. INTENDED USE This angle grinder shall be used for grinding or cutting metal or stones or similar materials. Other uses for the tool will lead to the damage of the tool and a series of dangers to the operator. -
Page 15: Working Hints For Your Angle Grinder
Always ensure the work-piece is firmly held or clamped to prevent movement. For cutting, always work with the wheel guard for cutting. Fig. 8 ANGLE GRINDER 750W TTB281GRD... -
Page 16: Maintenance
MAINTENANCE Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. - Page 17 L. A 13 AMP (BS1363 or BS1363/A) plug must be used and a 13 AMP fuse must be fitted. 13 AMP BLUE FUSE N (NEUTRAL) BROWN L (LIVE) OUTER SLEEVE CABLE GRIP ANGLE GRINDER 750W TTB281GRD...
-
Page 18: Declaration Of Conformity
EN 61000-3-2:2006 + A1:2009 + A2 :2009 EN 61000-3-3:2008 Authorised Signatory and technical file holder Date : 10/07/2013 Signature:_________________ Name / title: Peter Harries / Quality Manager Titan Power Tools (UK)Ltd. Trade House , Mead Avenue ,BA22 8RT ANGLE GRINDER 750W TTB281GRD...
Need help?
Do you have a question about the TTB281GRD and is the answer not in the manual?
Questions and answers