Table of Contents
Advertisement
EN
Product functions
Intended use
This angle grinder TITAN TTB87 8GRD is designated with a rated input of
750 Watts.
This product is intended for grinding and cutting-off applications with bonded
abrasive wheels on metal, stone or similar materials.
Depending on the intended application the respective safety guard and wheel
must be attached to the product. It is not intended for polishing, sanding or
operation with metal brushes. Do not work on soft materials like wood, wood
similar materials, soft metal like aluminium or lead.
The product may be used for dry operation only without water or other cooling
liquids
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
Switching on/off
1. Press the rear part of the on/off switch
locks in its on-position
2. Press the rear part of the on/off switch
off-position
Fig. 16: Off-position
30
(Fig.
16).
(Fig.
17).
TTB878GRD by TITAN
(4)
and slide it forward, until the switch
(4)
again so that it snaps back into its
4
Fig. 17: On-position
Advertisement
Table of Contents
