Page 1
SAFETY AND OPERATING MANUAL ANGLE GRINDER SF115XP...
Page 3
This guarantee does not affect your statutory rights.This guarantee is only valid in the UK. For further technical advice, spare parts or repair service (outside of guarantee) please contact the customer helpline number on 0845 607 6380. ANGLE GRINDER SF115XP...
SAFETY INSTRUCTIONS WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVETHESE INSTRUCTIONS Work area a. Keep work area clean and well lit. Cluttered and dark areas invite accidents. b.
Page 5
You are advised to consider the risks associated with the materials you are workingwith and to reduce the risk of exposure.You should: -- Work in a well-ventilated area. -Work with approved safety equipment, such as those dust masks that are specially designed to filter microscopic particles. ANGLE GRINDER SF115XP...
Page 6
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR ANGLE GRINDER 1. If the supply cord is damaged have it replaced by a qualified person. 2. Check that speed marked on the wheel is equal to or greater than the rated speed of the grinder. 3.
Remove the mains plug from socket before carrying out any adjustment or servicing. Ensure your mains supply voltage is the same as your tool rating plate voltage. SYMBOLS Read the manual Warning Wear gloves Wear dust mask,eye & ear protection ANGLE GRINDER SF115XP...
Page 8
1. SPINDLE LOCKING BUTTON 2. AUXILIARY HANDLE LOCATING HOLE 3. SOFT GRIP HANDLE 4. POWER CABLE 5. ON/OFF SWITCH BUTTON 6. LOCKED OFF LEVER 7. COOLING VENTS 8. AUXILIARY HANDLE 9. DISC GUARD 10. GRINDING DISC 11. DIRECTION OF ROTATION INDICATOR 12.
Ø 22mm Spindle size: Double insulation: Weight: 2.2Kg NOISE AND VIBRATION DATA Sound pressure level: 87.0dB (A) Sound power level: 100.0dB (A) Vibration level: 9.3m/sec ACCESSORIES Masonry grinding disc: 3pcs Metal grinding disc: 2pcs Side handle: Spanner: ANGLE GRINDER SF115XP...
Page 10
OPERATION INSTRUCTIONS WARNING: Before using your angle grinder be sure to read the instruction manual carefully. 1. INSTALLING THE AUXILIARY HANDLE (see fig1) An auxiliary handle is supplied and can be fixed into any of the three positions on the gearcase. If you are right handed fit the handle as shown in fig1.
Page 11
Do not in any circumstances, attempt to exert too much pressure on your angle grinder to speed up your work. ANGLE GRINDER SF115XP...
The abrasive discs operate more efficiently when light pressure is exerted, thus avoiding a drop in the speed of your angle grinder. If your angle grinder becomes too hot, run your angle grinder under no load for 2-3 minutes until it has cooled to normal operation temperature.
ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. PLUG REPLACEMENT ANGLE GRINDER SF115XP...
Page 14
The fuse in the main plug of your power tool should always be replaced with one of identical rating. Check the voltage given on your power tool matches the supply voltage. The power tool is supplied with a fitted plug, however if you should need to fit a new plug follows the instruction below.
Yeovil BA 22 8RT Declare that the product ANGLE GRINDER SF115XP Complies with the essential health and safety requirements of the following directives: 89/336 EEC, 93/68 EEC – EMC Directive. 73/23 EEC, 93/68 EEC – Low Voltage Directive. 98/37 EC – Machinery Directive.