Network Control Group Setting - LEGRAND CS102 User Manual

5.2.2. Network Control Group setting

From the main configuration menu, press "2" to enabled/disabled the network protocols:
============================================================
============================================================
1. IP, Time and System Group
2. Network Control Group
3. Account Control Group
4. Email Group
5. SNMP Group
0. Back to Main Menu
Please Enter Your Choice => 2
1. Select "6~9" to enter the related network control pages.
============================================================
============================================================
1. BOOTP/DHCP Control
2. Upgrade Control
3. Ping Echo Control
4. UPnP Control
5. HTTP Security
6. HTTP Control Group
7. SNMP Control Group
8. SMTP Control Group
9. SSH Control Group
0. Return to previous menu
Please Enter Your Choice =>
2. Enter the related HTTP setting as shown below.
============================================================
============================================================
1. HTTP Control
2. HTTP Port
0. Return to previous menu
Please Enter Your Choice =>
After completing these settings, press "0" to return to the previous menu.
CS102 Configuration Utility
UPS Model : Keor SPE
CS102 Configuration Utility
[Network Control Group]
: Disabled
: Enabled
: Disabled
: Disabled
: Enabled
Network Control Group
[HTTP Control Group]
: Enabled
: 80
49
CS102 SNMP Card
User Manual