Installation Procedure; Component List; Electrical Specification; Dry Contact Card Hardware Setting - LEGRAND KEOR COMPACT Installation Manual

3. Installation Procedure

3.1

Component List

The dry contact card package includes below items:
•
Dry-contact card × 1
•
M3 Screw × 2
3.2

Electrical Specification

• Output Relay：250VAC / 2A, 30VDC / 2A
• Input Contact：When the contact is closed, a current of 10mA max circulates.
3.3

Dry Contact Card Hardware Setting

Before installing this card to UPS, please check below jumpers setting as Figure 1 and Table 1 show.
J1
OUT-1 NO NC
Figure 1. Layout of dry-contact card
KEOR COMPACT
DRY CONTACT CARD
J2 J4
OUT-2 NO NC OUT-3 NO NC
5