Advertisement
ASSEMBLY INSTRUCTIONS
STEP 3
1. Slide the Upper Fixed Tube (21) onto the two Weight Guide Tubes (5), using two M8X15mm
Hex Bolts (94).
2. Remove two M10X20mm Hex Bolts (90) and two M10 Washers (97) from two Weight Guide
Tubes (5).
3. Attach the Upper Cross Beam (3) to the Weight Guide Tube (5), using two M10X20mm Hex
Bolts (90) and two M10 Washers (97).
Note: Attach the Upper Fixed Tube (21) to two Weight Guide Tubes (5), and be close to the
Upper Cross Beam (3).
4. Attach the Upper Cross Beam (3) to the Support Frame (4), using two M10X70mm Hex Bolts
(85), four M10 Washers (97) and two M10 Nylon Nuts (101).
97
101
97
97
97
85
3
4
-6-
90
97
94
5
21
5
3
94
21
Advertisement
