Advertisement
ASSEMBLY INSTRUCTIONS
STEP 1
1. Remove two M10X20mm Hex Bolts (90) and two M10 Washers (97) from two Weight Guide
Tubes (5).
2. Insert two Weight Guide Tubes (5) into the Rear Base Frame (1), using two M10X20mm Hex
Bolts (90) and two M10 Washers (97).
3. Attach the Arm Support Frame (13) to the Base Frame (2), using two M10X60mm Carriage Bolts
(83), two M10 Washers (97) and two M10 Nylon Nuts (101).
4. Attach the Support Frame (4) to the Base Frame (2), using two M10X70mm Hex Bolts (85), four
M10 Washers (97) and two M10 Nylon Nuts (101).
5. Attach the Base Frame (2) to the Rear Base Frame (1), using two M10X70mm Hex Bolts (85),
four M10 Washers (97) and two M10 Nylon Nuts (101).
6. Slide the Lower Fixed Tube (20) onto two Weight Guide Tubes (5), using two M8X15mm Hex
Bolts (94), and be close to the Rear Base Frame (1)
4
101
97
97
101
97
97
85
97
2
20
13
97
97
85
90
97
85
83
.
-4-
5
94
101
1
97
97
Advertisement
