Preparation - Panasonic ES-LA63A Operating Instructions Manual

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
into the shaver�
2
Plug the adaptor into a
household outlet�
• Check that the charge status
lamp ( ) is glowing.
• Charging is completed after
approx. 1 hour.
• If the shape of the plug does not
fit the power outlet, use an
attachment plug adaptor of the
proper configuration.
3
Disconnect the adaptor after
charging is completed�
Note
You cannot operate the shaver while charging.
12
While charging
glows.
The number of the battery
2
capacity lamp will increase
as charging progresses.
Notes
1
• When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C (50 °F – 95 °F). It may take longer to
charge, or the charge status lamp ( ) will blink
quickly and the battery may fail to charge properly in
extremely high or low temperatures.
• The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute dry‑shave usages per day in
an ambient temperature range of 20 °C – 30 °C
(68 °F – 86 °F).)
The number of usable days varies depending on the
following conditions.
‑ Beard thickness
‑ Pressure applied to the skin
After charging is
completed
All the battery capacity
lamp and will glow and
then turn off after
5 seconds.