Panasonic ES-LA63 Operating Instructions

Before operating this unit, please read these instructions completely and save them for future use.
Important

Before use
This WET/DRY shaver can be used for wet shaving with shaving
lather or for dry shaving. You can use this watertight shaver in the
shower and clean it in water. The following is the symbol of Wet
shaver. The symbol means that the hand-held part may be used in a
bath or shower.
Treat yourself to wet lather shaves for at least three weeks and notice
the difference. Your Panasonic WET/DRY shaver requires a little time
to get used to because your skin and beard need about a month to
adjust to any new shaving method.

Using the shaver
Caution - The outer foil is very thin and can be damaged if not used
correctly. Check that the foil is not damaged before using the shaver.
Do not use the shaver if the foil etc. is damaged as you will cut your
skin.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.

Charging the shaver
Do not use any power cord or AC adaptor other than one specifically
designed for this model (RE7-51). Plug in the adaptor into a
household outlet where there is no moisture and handle it with dry
hands. The shaver may become warm during use and charging.
However, this is not a malfunction. Do not charge the shaver where it
will be exposed to direct sunlight or other heat sources. Hold the
Operating Instructions
Rechargeable Shaver
Model No. ES-LA63
adaptor when disconnecting it from the household outlet. If you
tug on the power cord, you may damage it. The supply cord
cannot be replaced. If the cord is damaged, the appliance
should be scrapped.
Adequate ambient temperature for charging is 15-35 °C.
If the indicators on the LCD panel do not glow, wait for a short
while until it glows.

Cleaning the shaver
Warning - Disconnect the power cord from the shaver before
cleaning it to prevent electric shock.
Keep both the inner blades inserted. If only one of the inner
blades is inserted, the shaver may be damaged. If you clean the
shaver with water, do not use salt water or hot water. Do not
soak the shaver in water for a long period of time. Wipe it with a
cloth dampened with soapy water. Do not use thinners, benzine,
alcohol or other chemicals to clean.

Storing the shaver
Disconnect the power cord when storing the shaver. Do not
bend the power cord or wrap it around the shaver. Keep these
operating instructions in a safe place.
SPECIFICATIONS
Power source: See the name plate on the product.
(Automatic voltage conversion)
Motor voltage: 3.6 V DC
Charging time: 1 hour
This product is intended for household use only.
2
Panasonic Electric Works Co., Ltd.
F EN
Parts identification














a b


c d

e f 

g

A Protective cap c. Charge status
B Outer foil section d. Sonic vibration
1 Foil frame e. Foil/blade check
2 System outer foil f. Clean
3 System outer foil release g. Battery capacity
buttons 8 Appliance socket
C Inner blades 9 Trimmer
D Main body  Trimmer handle
4 Foil frame release buttons E Adaptor (RE7-51)
5 OFF/ON switch  Power cord
 Appliance plug
6 Switch lock button
7 LCD panel F Soft case
a. Used time G Cleaning brush
H Oil
b. Battery capacity
http://panasonic.net
ES9700LA631H Y0909-0
Charging
1
1 Insert the appliance plug into the
shaver.
2
2
Plug in the adaptor into a household
outlet.
• The indicators on the LCD panel glow and charging
starts.
• Charging is completed when the indicators on the
LCD panel blink.
(Max. 1 hour later)
3
Printed in Japan