Table of Contents
Advertisement
B AC adaptor (RE7-87)
= Adaptor
> Power plug
? Cord
@ Appliance plug
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug into
the shaver�
2
Plug the adaptor into a
household outlet�
• Check that the charge status lamp
(
) is glowing.
• Charging is completed after approx.
1 hour.
3
Disconnect the adaptor after charging is completed�
Accessories
C Travel pouch
D Cleaning brush
E Oil
2
1
While charging
The charge status lamp (
)
glows.
The battery capacity lamp will
blink in order of "LOW", "MID",
and "HIGH" while the charging
progresses.
Abnormal charging
The charge status lamp (
) will blink twice every second.
Notes
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp (
minutes. It will eventually glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge status
lamp (
) will blink quickly and the battery may fail to charge
properly in extremely high or low temperatures.
After charging is completed
The battery capacity lamp and
the charge status lamp (
)
will light up and then turn off
after 5 seconds.
) may not glow for a few
9
Advertisement
Chapters
Table of Contents
