Advertisement
Quick Links
TABLE OF CONTENTS
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 7
5 Schematic Diagram ---------------------------------------------12
6 Exploded View and Replacement Parts List -----------13
Model No.
Asia
PAGE
© Panasonic Electric Works Co., Ltd. 2009.
All rights reserved. Unauthorized copying and distri-
bution is a violation of law.
Order Number SD0906A65CE
Rechargeable Shaver
ES-LA92
ES-LA62
PAGE
Advertisement
Related Manuals for Panasonic ES-LA92
Summary of Contents for Panasonic ES-LA92
-
Page 1: Table Of Contents
3 Troubleshooting Guide ----------------------------------------- 3 4 Disassembly and Assembly Instructions ---------------- 7 5 Schematic Diagram ---------------------------------------------12 6 Exploded View and Replacement Parts List -----------13 © Panasonic Electric Works Co., Ltd. 2009. All rights reserved. Unauthorized copying and distri- bution is a violation of law. -
Page 2: Warning
1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long. -
Page 3: Troubleshooting Guide
3 Troubleshooting Guide 3.1. Main unit and charging adaptor... - Page 5 3.2. Self-cleaning recharger (ES-LA92 only)
- Page 6 3.3. Operation of Self-cleaning Recharger (ES-LA92 only)
-
Page 7: Disassembly And Assembly Instructions
4 Disassembly and Assembly Instructions 4.1. Disassembly Instructions Follow the procedure below to disassemble the main unit. 1. Remove the cap, the outer foil with outer foil frame and 3. To remove the trimmer driving bar or the slit blade driving the inner blades. - Page 8 5. Take out the battery from the chassis. 7. Move gently the linear motor assembly down and unhook it and remove the float springs from housing A. 6. Unsolder the lead wires from the module.
- Page 9 4.2. Caution in Assembly NOTE: When reassembling, replace the new waterproof seal. Make sure whether there is NO foreign substance sticking around a part covered with waterproof seal. 1. Solder the lead wires with the module. NOTE: Comfrm the position of waterproof rubber. NOTE: Make sure of the color of lead wires.
- Page 10 5. When putting the housing A and the housing B together, make sure if the waterproof seal must be fitted properly and no foreign substance sticking around. 6. Attach the rear panel firmly.
- Page 11 7. Attach the bottom cover and tighten a screw. 8. Set the trimmer driving bar and the slit blade driving bar.
-
Page 12: Schematic Diagram
5 Schematic Diagram 5.1. ES-LA92 5.2. ES-LA62... -
Page 13: Exploded View And Replacement Parts List
6 Exploded View and Replacement Parts List Model No. : ES-LA92 Exploded View... - Page 14 Model No. : ES-LA92 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks ES-LA92 WESLA92X7158 PROTECTIVE CAP WESLA92K0047 OUTER FOIL FRAME WES9165E OUTER FOIL WES9068E INNER BLADE WESLA92L1007 LINEAR MOTOR ASSEMBLY WESLA92L1087 TRIMMER DRIVING BAR WES8258L1077 SLIT BLADE DRIVING BAR...
- Page 15 Model No. : ES-LA62 Exploded View...
- Page 16 Model No. : ES-LA62 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks ES-LA62 WESLA92X7158 PROTECTIVE CAP WESLA82S0047 OUTER FOIL FRAME WES9165E OUTER FOIL WES9068E INNER BLADE WESLA63L1008 LINEAR MOTOR ASSEMBLY WESLA92L1087 TRIMMER DRIVING BAR WES8258L1077 SLIT BLADE DRIVING BAR WES8258L1177 FINISHING BLADE DRIVING BAR WES8258L0327...