phone.
•
Select the menu item "Teach-in device".
Open the lock (F) of the battery compartment (E)
•
using the supplied four Allen head wrench (see
figure 2).
Remove the battery compartment cover (B) to
•
the back and downwards to remove it from the
device (see figure 3).
•
Remove the insulation strip from the battery
compartment of the radiator thermostat. The
teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (C)
shortly (see figure 4).
•
Your device will automatically appear in the
Homematic IP app.
•
To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
•
Please wait until teach-in is completed.
If teaching-in was successful, the LED (C) lights
•
up green. The device is now ready for use. If the
LED lights up red, please try again.
•
In the app, give the device a name and allocate
it to a room.
Start-up
41
Need help?
Do you have a question about the HmIP-eTRV-C-2 and is the answer not in the manual?