Cannot Send Faxes To A Specific Recipient; Cannot Send Faxes At A Specified Time; Cannot Receive Faxes - Epson WF-2750DWF User Manual

User's Guide
❏ If you have blocked your caller ID, unblock it. Some phones or fax machines automatically reject anonymous
calls.
❏ Ask the recipient if the fax number is correct and the recipient's fax machine is ready to receive a fax.
Related Information
"Fax Settings" on page 22
&
"Cannot Send or Receive Faxes" on page 125
&

Cannot Send Faxes to a Specific Recipient

Check the following if you cannot send faxes to a specific recipient due to an error.
❏ If the recipient machine does not pick up your call within 50 seconds after the printer has finished dialing, the
call ends with an error. Dial using a connected telephone to check how long it takes before you hear a fax tone. If
it takes more than 50 seconds, add pauses after the fax number to send the fax. Press
hyphen is entered as the pause mark. One pause is about three seconds. Add multiple pauses as needed.
❏ If you have selected the recipient from the contacts list, verify that the registered information is correct. If the
information is correct, select the recipient from the contacts list, press the
the Add Entry screen, change Fax Speed to Slow(9,600bps).
Related Information
"Sending Faxes Dialing from the External Phone Device" on page 73
&
"Registering Contacts for Faxing" on page 70
&
"Cannot Send or Receive Faxes" on page 125
&

Cannot Send Faxes at a Specified Time

Set the date and the time correctly on the control panel.
Related Information
"Sending Faxes at a Specified Time (Send Fax Later)" on page 73
&
"Setup Mode" on page 18
&

Cannot Receive Faxes

❏ If you have subscribed to a call forwarding service, the printer may not be able to receive faxes. Contact the
service provider.
❏ If you have not connected a telephone to the printer, set the Receive Mode setting to Auto on the control panel.
Related Information
"Fax Settings" on page 22
&
"Cannot Send or Receive Faxes" on page 125
&
"Memory Full Error Occurs" on page 128
&
Solving Problems
127
to enter the pause. A
r
button, and then select Edit. On