Turning Off An Alarm Or The Hourly Time Signal; World Time; Checking World Time; World Time City Setting - Casio G-Shock GG-B100 Operation Manual

Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
Note
Indicators are displayed while any of
●
the alarms or the hourly time signal is
turned on.
The applicable indicators are not
●
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Alarm
Hourly time signal
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (A) and (C) to scroll through alarm
numbers ([AL1] to [AL5]) and the hourly
time signal ([SIG]) screens until the one
whose setting you want to change is
displayed.
Alarm or hourly time signal
3.
Press (D) to turn off an alarm or the hourly
time signal.
Each press of (D) toggles between ON
●
and OFF.
Turning off all alarms will cause
●
(alarm) to disappear from the display,
while disabling the hourly time signal
causes (hourly time signal) to
disappear from the display.
Operation Guide 5594
Note
If (alarm) is still displayed, it means
●
that another alarm is still turned on. To
turn off all of the alarms, repeat steps
2 and 3 until the
is no longer displayed.

World Time

World Time lets you look up the current time
in any one of 38 cities around the globe, and
UTC (Universal Coordinated Time).
Note
World Time cities that can be selected
●
only by using G-SHOCK Connected
cannot be selected using watch
operations.
Configuring World Time Settings
l

Checking World Time

1.
Enter the World Time Mode.
Navigating Between Modes
l
After the currently selected World Time
City name appears, the watch will display
the current time in that city.
To display the World Time City name
●
while in the World Time Mode, press
(D).
World Time City
World Time

World Time City Setting

Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.
(alarm) indicator
Note
1.
2.
3.
4.
5.
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
Enter the World Time Mode.
Navigating Between Modes
l
Use (A) and (C) to display the city you
want.
To change the summer time setting, hold
down (D) for at least two seconds.
Release the button when [AUTO], [OFF],
or [ON] starts to flash.
Use (A) to select a summer time setting.
Each press of (A) cycles through available
settings in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
Press (D) to exit the setting screen.
30