Using Mobile Link With A Mobile Phone; Getting Ready; Auto Time Adjustment - Casio G-Shock GG-B100 Operation Manual

Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while G-
●
SHOCK Connected is running on the
phone.
This section describes watch and
●
phone operations.
X : Watch operation
Y : Phone operation

Getting Ready

To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
●
A Install the required app on your
phone.
In Google Play or the App Store, search for the
CASIO "G-SHOCK Connected" app and
install it on your phone.
● B Configure Bluetooth settings.
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
Operation Guide 5594
●
C Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y Tap the "G-SHOCK Connected" icon.
3.
Y Perform the operation shown on the
screen of the phone to be paired with.
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
After pairing starts, the second hand will
●
move to [R]. When pairing is complete,
the second hand will move to [C].
If pairing fails for some reason, the
●
watch will return to the state in step 1 of
this procedure. Perform the pairing
procedure again from the beginning.
Note
The first time you start up G-SHOCK
●
Connected, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.

Auto Time Adjustment

The watch will connect with a phone at preset
times each day and adjust its time settings.
Using Auto Adjust
●
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
While G-SHOCK Connected is not
ー
running on the phone
Note
If the watch does not indicate the
●
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator alignment.
Adjusting Hand Alignment
l
If there is a World Time City specified
●
with G-SHOCK Connected, its time will
also be adjusted automatically.
The watch will connect with the phone
●
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
9