Configuring World Time Settings; Adjusting Hand Alignment - Casio G-Shock GG-B100 Operation Manual

Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
Connected causes the watch's World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Note
G-SHOCK Connected World Time lets
●
you select from among approximately
300 cities as the World Time City.
Selecting a World Time City
●
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3.
Y Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
Note
You can use G-SHOCK Connected to
●
configure settings for user cities that
are not included in the watch's built-in
World Time Cities. You must use G-
SHOCK Connected to select a user
city as your World Time City.
Operation Guide 5594
Configuring the Summer Time Setting
●
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3.
Y Perform the operation shown on the
phone screen to select a summer time
setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
Connection
summer time manually. Even if you are
successful
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
For information about summer time
●
periods, refer to the "Summer Time
Table" or G-SHOCK Connected.
Swapping Your World Time and Home
●
Time
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Connection
successful
Trying to connect
3.
Y Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
The watch will not perform auto time
●
adjustment for 24 hours after you swap
your Home Time and World Time.

Adjusting Hand Alignment

If the hands are out of alignment even though
auto time adjustment is being performed, use
G-SHOCK Connected to adjust them.
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3.
Y Perform the operation shown on the
phone screen to correct hand alignment.
Connection
successful
Connection
successful
14