Table of Contents
Advertisement
8.2 ELECTRONICS/GENERAL DATA
Control
Method
Inputs
Digital
(CC11 RB board)
Outputs
Analog
(CC11 RB board)
Relay
Safety
Protection
Integral
Standard
Keypad (HMI)
Keypad
Enclosure
IP20
IP00
PC Connection
USB
for Converter
Connector
Programming
8.2.1 Codes and Standards
Safety Standards
Electromagnetic Compatibility
(EMC)
Mechanical Standards
Type of control
„
- Vector Control
PWM SVM (Space Vector Modulation)
„
Current, DC link voltage and reactive regulators
„
6 isolated differential inputs, 24 Vdc, programmable functions
„
2 isolated analog outputs, (0 to 10) V, RL ≥ 10 kΩ (maximum load), 0 to 20 mA /
„
4 to 20 mA (RL ≤ 500 Ω) resolution: 11 bits, programmable functions
3 relay outputs with NO/NC contacts, 240 Vac, 1 A, programmable functions
„
Input Overcurrent/Short-circuit
„
Under/Overvoltage
„
Phase loss
„
Overtemperature
„
IGBTs overload
„
External Fault/Alarm
„
CPU or memory fault
„
DC link phase-ground short-circuit
„
4 keys: active : Up Arrow, Down Arrow, Right Soft Key and Left Soft Key.
„
disabled: General Enable/Disable, Direction of Rotation, JOG, Local/Remote
Graphical LCD display
„
View/edition of all parameters
„
Indication accuracy:
„
- current: 5 % of the rated current
Possibility of remote assembly
„
Frame size E
„
Frames sizes F and G
„
USB standard Rev. 2.0 (basic speed)
„
Type B (device) USB plug
„
Interconnection cable: standard host/device shielded USB cable
„
UL 508C - Power conversion equipment
„
UL 840 - Insulation coordination including clearances and creepage distances for electrical
„
equipment
EN61800-5-1 - Safety requirements electrical, thermal and energy
„
EN 50178 - Electronic equipment for use in power installations
„
EN 60146 (IEC 146) - Semiconductor converters
„
EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements -
„
Rating specifications for low voltage adjustable frequency AC power drive systems
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC product standard
„
including specific test methods
EN 55011 - Limits and methods of measurement of radio disturbance characteristics of
„
industrial, scientific and medical (ISM) radio-frequency equipment
CISPR 11 - Industrial, scientific and medical (ISM) radio-frequency equipment -
„
Electromagnetic disturbance characteristics - Limits and methods of measurement
EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
„
techniques - Section 2: Electrostatic discharge immunity test
EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
„
techniques - Section 3: Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
„
techniques - Section 4: Electrical fast transient/burst immunity test
EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
„
techniques - Section 5: Surge immunity test
EN 61000-4-6 - Electromagnetic compatibility (EMC)- Part 4: Testing and measurement
„
techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency
fields
EN 60529 - Degrees of protection provided by enclosures (IP code)
„
UL 50 - Enclosures for electrical equipment
„
Technical Specifications
CFW-11 RB | 8-7
8
8
Advertisement
Table of Contents
