2. Quick Install Your Vigor2500V / 2510V Series Router
2.1 Hardware Installation
Before starting to configure the router, you have to connect your devices
correctly.
1. Connect the ADSL interface to the external splitter with a RJ-11 cable.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable.
3. Connect Phone port to
wireless (DECT),
4. Connect Line port to land line jack with a RJ-11 cable.
5. Connect the attached power adapter to the power port.
6. Check the ACT and ADSL, LAN LEDs to assure network connections.
(Regarding the detailed LED status explanation, please refer to section 1.3)
Caution
The Phone port can be connected to an analog phone only. Do
not connect the Phone port to the telephone wall jack. This connection
might damage your router.
a conventional analog telephone, either corded or
with a RJ-11 cable.
9