Advertisement
RETROFITTING THE REMOTE CONTROL
In order to retro-fit your remote, please ensure you follow these steps
BEFORE you attempt to use the remote control system.
1
To begin the retro-fit of the remote
To begin the retro-fit of the remote
control, press the 'update' icon on
control, press the 'update' icon on
the e-smart cloud app home screen.
the e-smart cloud app home screen.
3
Once the settings panel is open,
Once the settings panel is open,
click 'other options'.
click 'other options'.
5
Press save. You will then hear an
Press save. You will then hear an
audible beep to notify you of the
audible beep to notify you of the
pairing.
pairing.
EVONIC - 147a - QUICK SETUP ISSUE TEMPLATE
EVONIC - 147a - QUICK SETUP ISSUE TEMPLATE
BUILT-INS - ISSUE 3
BUILT-INS - ISSUE 3
2
Once the fire has updated, select the
Once the fire has updated, select the
settings icon on the home screen.
settings icon on the home screen.
4
Scroll down to the section that
Scroll down to the section that
states 'allow remote control
states 'allow remote control
(universal)'.
(universal)'. Make sure this is
Make sure this is
highlighted.
highlighted. Press save.
Press save.
6
Turn your fire OFF, then back ON.
Turn your fire OFF, then back ON.
9
Advertisement
