CONTENTS APP SETUP................3 USING THE E-SMART CLOUD APP..........5 RETRO-FITTING THE REMOTE..........9 USING THE REMOTE CONTROL..........10 LOG GUIDANCE................11 TROUBLESHOOTING..............15 MINIMUM REQUIREMENTS In order for your fire to connect to the app, your internet router and smart device should meet the following minimum requirements; Wi-Fi Router •...
APP SETUP To begin using the app you first need to pair your appliance To begin using the app you first need to pair your appliance to the app, we have created a video on our Youtube channel to the app, we have created a video on our Youtube channel to guide you through the process of pairing your appliance to guide you through the process of pairing your appliance to your smart phone or tablet.
Page 4
Settings Save Open the settings panel on the Scroll down to the ‘IoT Registration’ app’s Home Screen. section and fill in your email address and create a password. Press ‘Save’. Then select the grey WiFi button. icon Deselect static IP The pairing process between your Select your router from the drop down box, and enter your router’s...
USING THE E-SMART CLOUD APP Fire settings Press to turn Timer settings the lights in Shop the fire on Settings Press to turn the heater on HOME PAGE On the Home Page of the E-Smart Cloud App you can see the name of your fire, the chosen temperature, and the actual temperature.
Page 6
CONTROL OVERVIEW Temperature dial Desired temperature Animation settings Feature lighting Lighting settings Speed settings Flame adjustor Fuel bed adjustor To adjust the desired temperature of your fire ensure that the heater is selected on the To adjust the desired temperature of your fire ensure that the heater is selected on the Home Page in the previous step.
Page 7
PROGRAMMING THE TIMER Back Timer settings Desired time Action Day selection Save button Input your desired time in the Time Input your desired time in the Time Single press the clock icon on the Single press the clock icon on the box, select the action (Fire On/Off/, box, select the action (Fire On/Off/, Home Page to begin programming the...
Page 8
UPDATING YOUR FIRE Update Update your fire by clicking on the triangular icon. Do not turn your fire off until it is complete It may take up to 10 minutes to update. LOGGING OUT Log out To log out of your account, single press the exit icon in the top right hand To log out of your account, single press the exit icon in the top right hand corner of the Home Page.
RETROFITTING THE REMOTE CONTROL In order to retro-fit your remote, please ensure you follow these steps BEFORE you attempt to use the remote control system. To begin the retro-fit of the remote To begin the retro-fit of the remote Once the fire has updated, select the Once the fire has updated, select the control, press the ‘update’...
USING THE REMOTE Top Left - Turn your fire ON and OFF Top Right - Turn your feature lights ON and OFF Middle Left - Turn your heater ON Middle Right - Turn your heater OFF Bottom Left - Change the flame animation Bottom Left - Adjust the brightness.
Page 12
Halo 750 1 x Twig Log Set Woodland / Silver Birch + 1 x Small Log Set Halo 600/700 SL 2 x Small Woodland / Silver Birch E800T Halo 800 1 x Large Woodland / Silver Birch Halo 1030 / E1030...
Page 15
PROBLEMS CONNECTING If you are having problems connecting your fire with your device and router please try the following steps to fix the issue. • • Switch your fire OFF Switch your fire OFF • • Switch your internet router OFF Switch your internet router OFF •...
Page 16
Settings Your Fire • • Go to the WiFi settings on your Go to the WiFi settings on your • • Go to the E-Smart app and click Go to the E-Smart app and click phone or device. phone or device. ‘Settings’...
Page 17
• • Click on the grey WiFi button Click on the grey WiFi button • • Check that the name of your Check that the name of your WiFi and the WiFi password WiFi and the WiFi password are correct, you can click the are correct, you can click the eye icon to help you see any eye icon to help you see any...
Page 18
2:00 Switch your fire OFF • • Wait 2 minutes... Wait 2 minutes... (If it doesn’t appear to be connecting (If it doesn’t appear to be connecting • • Switch your internet router ON Switch your internet router ON then close the app and then continue then close the app and then continue with step 10) with step 10)
Page 19
RESETTING YOUR FIRE If you have entered a wrong email or password during the set-up process, then you may need to reset your fire to factory settings. To do this your fire must be updated to the latest version, you can do this by following the instructions on page 15.
Need help?
Do you have a question about the E800T and is the answer not in the manual?
Questions and answers