Table of Contents
Advertisement
The transmitter must be mounted before any wire connections.
The transmitter must not be powered before mounting it.
To install the transmitter on a wall:
• Fix the stainless steel plate to the wall (drilling: Ø 8 mm, screws and wall-plugs supplied).
• Insert the transmitter on the plate (see A on the drawing below) by aligning it at 30°.
• Rotate the housing in clockwise direction until you heard a "click" which confirms that the transmitter is cor-
rectly installed.
• Open the housing, lock the clamping system of the housing on the plate with the screw (see photo below).
The fixing screw is in a plastic bag into the box of the C320. type of screw: Cruciform screw Ø 3.5x12 mm
120 mm (4.73'')
A
A
65 mm (2.56'')
To remove the transmitter from the fixing plate, do not forget to remove this screw.
Mounting
Ø 5,4 mm (0.21'')
4. Mounting
Fixing screw of the housing
9
Advertisement
Table of Contents
