Table of Contents
Advertisement
There is no alarm configured and activated for the channel
An alarm is configured and activated for the channel
Channel 2
2
37.5
°C
Channel 3
1
ERROR
3.2 Connections
1
2
4
3
Analog output 1
Analog output 2
(OUT 1)
1 - Connection for PC software
2 - Wireless module (optional)
3 - Pressure module (optional)
4 - Solenoid valve
8
In case of alarm, the measurement concerned by the alarm will be in red on the screen
In case of faulty communication with the transmitter, the concerned channel's background
will change to orange. By tapping on the screen a message with additional information
about the problem is displayed.
5
6
(b)
Analog output 3
(OUT 2)
(OUT 3)
8
7
Analog output 4
(OUT 4)
5 - Autozero
6 - RS-485 connection (a)
7 - Analog outputs (b)
8 - Power supply terminal block (c)
(a)
RS-485 interface
(c)
24 V
/V
power supply:
DC
AC
Introduction
Advertisement
Table of Contents
