Set An Output; Disconnect A Probe - sauermann Si-C320 User Manual

6.4 Set an output

10:35 - 10/12/2021
Select Analog Output
Output 1
Output 2
Output 3
Output 4
Next
Tap the output to set corres-
ponding to the previously
con gured channel.
For models without display, please use the app to set your output.
Download Sauermann Control App

6.5 Disconnect a probe

• Turn the ring (c) of the probe connector to the left.
• Pull the probe connector (a) away from the transmitter connector (b).
c
First Start-up
10:35 - 10/12/2021
Output 2
Output type
High Range (%RH)
Low Range (%RH)
Diagnostic
Activate the output taping
Set the output type and high
and low range values then tap
the back arrow on the top left.
Next
10:35 - 10/12/2021
Select Analog Output
4-20 mA
Output 1
98.0
Output 2
10.0
Output 3
Output 4
.
10:35 - 10/12/2021
b
a
Next
Tap ''Next'' to
display measures.
Measures
Channel 2 1
27.7
%RH
13