Table of Contents
Advertisement
6.2 Connect a probe
• After removing the protection cap on the transmitter connector, present the probe connector (a) with its arrow
and padlock face to the transmitter connector (b).
• Push in the probe connector (a) into the transmitter connector (b) until you hear a click. The probe is correctly
connected.
a
6.3 Set a channel
10:35 - 10/12/2021
Channel Con guration
Please connect the probe(s)
before con guring the
channel(s)
Next
Connect a probe to set a
channel and tap ''Next''.
For models without display, please use the app to set your channel.
Download Sauermann Control App
Activate the channel taping
''Measures'', ''Units'', ''Coef cient'' and
12
''Offset'' are now available.
b
CLICK
10:35 - 10/12/2021
Select Channel
Channel 1
Channel 2
Channel 3
Channel 4
Next
The list of available channel is
displayed.
Tap the required channel.
10:35 - 10/12/2021
Select Channel
Channel 1
Channel 2
Channel 3
Channel 4
Next
Next
Channel 2 is con gured. Tap
next to con gure outputs.
.
10:35 - 10/12/2021
Channel 2
PROBE 1
PROBE 2
MODULE
SELECT UNIT
Measures
Units
Coef cient
Offset
Tap ''PROBE 1'', ''PROBE
2'' or ''MODULE''.
Parameters to set are now
available.
10:35 - 10/12/2021
Channel 2
PROBE 1
PROBE 2
MODULE
Rel. Humidity
Measures
Units
Coef cient
Offset
Set the parameters according
to your needs then tap the
back arrow on the top left.
- - - -
1.000
0.00
%RH
1.000
0.00
First Start-up
Advertisement
Table of Contents
