Technical Information - Magmaweld DFM 1000 User Manual

DFM 1000 - 1250 - 1500

TECHNICAL INFORMATION

1.1 General Information
It is used for extracting and filtering of the welding fume&dust. Designed for filtering welding fume of
work pieces which has lower than 15 cm lenght and work pieces don't prevent suction. DFM welding fume
extractors can be used with variable tray and cover options.
In case of improper use, dust and fume are not absorbed correctly. For this reason, lungs and
respiratory tract may be damaged!
Keep the user manual well!
www.magmaweld.com
Figure 1 : DFM Front View
Technical Information
USER MANUAL | KULLANIM KILAVUZU
7
EN