Safety Precautions - Magmaweld DFM 1000 User Manual

DFM 1000 - 1250 - 1500

SAFETY PRECAUTIONS

Be Sure To Follow All Safety Rules In This Manual!
Explanation Of Safety
Information
Comprehending Safety
Precautions
Electric Shocks
May Kill
Welding Wires Can
Cause Injuries
Maintenance Done
By Unauthorized Persons
On The Machines And
Apparatus May Cause
Injuries
www.magmaweld.com
• Safety symbols found in the manual are used to identify potential hazards.
• When any one of the safety symbols are seen in this manual, it must be understood that there is
a risk of injury and the following instructions should be read carefully to avoid potential hazards.
• During operation of the welding fume extraction systems, keep third parties other than the
operators, especially children, away from the working area.
• Read the user manual, the label on the machine and the safety instructions carefully.
• Make sure that the warning labels on the machine are in good condition. Replace missing and
damaged labels.
• Learn how to operate the machine, how to make the checks in a correct manner.
• Use your machine in suitable working environments.
• Improper changes made in your machine will negatively affect the safe operation and its
longevity.
• Operate your machine in convenient working areas. Improper modifications that can be made on
your machine affect the safety of your machine negatively and shorten its lifetime.
Make certain that the installation procedures comply with national electrical standards
and other relevant regulations, and ensure that the machine is installed by authorized
• Installation procedure must comply with national electricity standards and other relevant
persons.
regulations and ensure that installation is performed by qualified persons.
• Wear dry insulating gloves free of damage and body protection.
• If damage is detected on any of the cables of the machine, please contact the authorized persons
and disconnect the power supply cable from the electrical outlet.
• The unit is manufactured according to CE security standards. Although, the unit may cause
serious injuries loss of limbs.
• Turn off the machine, when not in use.
• Disconnect the power connections and/or plugs or turn off the machine before repairing the
unit.
• Be carreful while working with a long input power cord.
• Frequently inspect all the cables against damages. Repair or replace the damaged or
uninsulated cables immediately if damaged.
• Make sure that the electric line is properly grounded.
• During the closing and positioning of the flex arm, avoid from impacts and limb entrapment,
this may cause serious injuries and loss of limbs.
• If there is a need to adjust the comfort of motion of the flex arms, ask the authorities for help.
• During the adjustment of the flex arms, use suitable gloves and an appropriate wrench. Do not
disassemble the springs attached to the arms as they may cause injury.
• Failure to make the motion adjustments of the flex arms correctly may cause the machine to
overturn and this may cause serious injuries.
• Keep all the protectors such as covers, panels, doors, etc. of the machines and devices close and
locked.
• Wear shoes with metal protection over the fingers against the fall down possibility of heavy
objects.
• Electrical equipment should not be repaired by unauthorized persons. Failure to do so may
result in serious injuries or death.
• Serious malfunctions and fire may occur and the users can be seriously injured as a result of
the services provided by unauthorized people regarding the smoke, dust, odor absorption and
filtration systems.
Safety Precautions
USER MANUAL | KULLANIM KILAVUZU
5
EN