White Light; Video Settings; Image Mode - HIKVISION DS-2CE12KF3T-LE User Manual

Day to Night Threshold is used to control the sensitivity
of switching the day mode to the night mode. You can set
the value from 1 to 9. The larger the value is, the more
sensitive the camera is.
N D Threshold (Night to Day Threshold)

Night to Day Threshold is used to control the sensitivity
of switching the night mode to the day mode. You can set
the value from 1 to 9. The larger the value is, the more
sensitive the camera is.
 WHITE LIGHT
Under the WHITE LIGHT sub-menu, you can set the mode
to OFF or AUTO.
OFF: Set it to OFF to give up this function.
AUTO: You can set THRESHOLD and LEVEL in this section.
THRESHOLD

The higher the threshold is, the more sensitive the device
is to dark environment.
LEVEL

You can adjust the maximum brightness of supplement
light.
MODE
The function is to reduce frame rate in low-light
environment in order to increase SNR and enhance the
brightness of the image.
MODE1: Turn on the function.

MODE2: Turn off the function.

Note:
The function is not supported by the device powered via
coaxial (PoC) technology, or the device with its video
format setting to 3K@20 fps.

3.4 VIDEO SETTINGS

Move the cursor to VIDEO SETTINGS and click Iris+ to
enter the submenu. IMAGE MODE, WHITE BALANCE,
BRIGHTNESS, CONTRAST, SHARPNESS, SATURATION,
3DNR, and MIRROR are adjustable.

IMAGE MODE

IMAGE MODE is used to adjust the image saturation, and
you can set it to STD (Standard), HIGH-SAT (High
Saturation), or HIGHLIGHT (better indoor facial details).
WHITE BALANCE
White balance, the white rendition function of the
camera, is to adjust the color temperature according to
the environment. It can remove unrealistic color casts in
VIDEO SETTINGS
IMAGE MODE
WHITE BALANCE
BRIGHTNESS
CONTRAST
SHARPNESS
SATURATION
3DNR
MIRROR
BACK
EXIT
SAVE & EXIT
Figure 3-3 VIDEO SETTINGS
STD
5
5
5
5
5
OFF
14