Table of Contents
Advertisement
4.3 MGM220P Reset
The MGM220P Module can be reset by a few different sources:
• A user pressing the RESET button
• The on-board debugger pulling the #RESET pin low
• An external debugger pulling the #RESET pin low
In addition to the reset sources mentioned above, a reset to the MGM220P will also be issued during board controller boot-up. This
means that removing power to the board controller (unplugging the J-Link USB cable) will not generate a reset, but plugging the cable
back in will, as the board controller boots up.
silabs.com | Building a more connected world.
UG461: MGM220P Wireless Gecko Module Starter Kit User's Guide
Power Supply and Reset
Rev. 1.0 | 15
Advertisement
Table of Contents
Need help?
Do you have a question about the SLWSTK6104A and is the answer not in the manual?
Questions and answers