Auger And Extruding Head Removal - Cornelius Quantum 1000 Service Manual

Continuous Flow Icemaker Service Manual
A E
UGER AND XTRUDING
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
1. Disconnect unit from power supply.
2. Remove storage container cover and put aside.
3. Turn off water supply to icemaker.
4. After ice has melted from head take hold of the auger nut and lift straight up to disengage from icemaker.
5. When replacing the auger assembly, make certain that both the auger engages the output shaft drive and the
extruding head ribs engage the evaporator tube.
Publication Number: 630460174SER
H R
EAD EMOVAL
- 18 - © 2004-2011, IMI Cornelius Inc.