Table of Contents
Advertisement
6.7.1.4
Pushing in the seat post
Open the clamping lever for the quick release on
the seat post.
Push in the saddle to the minimum position.
Close the clamping lever for the quick release on
the seat post.
6.7.1.5
Folding the frame
Pivot the frame locking lever upwards.
The frame clamping lever can be opened freely.
Open the frame clamping lever.
Pivot in the frame as far as it will go.
2
Figure 73: Frame, with closed frame clamping lever (1) and
open frame locking lever (2)
6.7.2
Preparing the bicycle so that it is
ready to ride again
WARNING
!
Risk of fire and explosion due to faulty battery
If the bicycle is not prepared correctly ready for
use, this may result in the rider falling and
sustaining serious injury.
Only use pedelec when it is correctly prepared
ready for use with the locking lever closed.
The specialist dealer will show the operator or
rider how the pedelec is folded, how it is prepared,
so that it is ready to ride again, and how the quick
releases are used.
The bicycle is prepared so that it is ready to ride
again in eight steps.
Switching off the electric drive system.
Use the kickstand.
MY20H02-12_1.0_12.06.2019
Fold out the frame.
Adjust the stem.
Adjust the saddle.
Fold out the pedal.
Insert the battery.
Attach the display.
6.7.2.1
Completely fold out the frame.
Close the frame clamping lever.
The frame clamping lever rests on the limit stop.
The frame locking lever holds the frame clamping
lever. The frame clamping lever is closed.
2
1
Figure 74: Frame, with closed frame clamping lever (1) and
closed frame locking lever (2). Folding out the pedal
Push the pedal against the pedal crank with the
foot from the front.
Figure 75: Pushing the pedal against the pedal crank (1)
Use the foot to fold the pedal up or down.
Figure 76: Folding up the pedal
Folding out the frame
Operation
1
73
Advertisement
Table of Contents
