Table of Contents
Advertisement
6.7
Folding
Only applies to pedelecs with this equipment
Notice
Never crush or bend cables, electric cables or
brake cables when folding.
6.7.1
Folding the folding bicycle
The pedelec is folded in eight steps.
Switch off the electric drive system.
Use the kickstand.
Remove the display.
Remove the battery if necessary.
Fold the pedal.
Fold the stem.
Push in the seat post.
Fold the frame.
6.7.1.1
Folding the pedal
Push the pedal against the pedal crank with the
foot.
Figure 69: Pushing the pedal against the pedal crank (1)
Fold the pedal against the pedal crank.
I
Figure 70: Folding the pedal up (I) or down (II)
MY20H02-12_1.0_12.06.2019
1
II
6.7.1.2
Folding the stem 1, Folding
Only applies to pedelecs with this equipment
Open the clamping lever on the stem quick
release.
Pull the locking lever on the stem upwards and
simultaneously pivot it 90° to the right or the left.
You feel the handlebars click into place.
Push in the handlebars.
Close the clamping lever on the stem quick
release.
3
Figure 71: Opened clamping lever on the stem quick
release (3) on the stem (2), version I, with locking lever on
the stem (1)
6.7.1.3
Folding the stem 2, Folding
Only applies to pedelecs with this equipment
Open the clamping lever on the stem quick
release.
Push the unlocking knob.
Pivot the handlebars 90° to the right or left.
You feel the handlebars click into place.
Close the clamping lever on the stem quick
release.
2
Figure 72: Stem, version II with clamping lever on the stem
quick release (1) and unlocking knob (2)
Operation
2
1
1
72
Advertisement
Table of Contents
