Table of Contents
Advertisement
3.6.4.2 Level of assistance
The higher the level for assistance, the more the
drive system assists the rider when pedalling. The
following levels of assistance are available:
Different levels of assistance are available for
different BOSCH motors.
Level of assistance
Use
When the drive system is switched on,
the motor assistance is switched off.
The pedelec can be used like a
O FF
normal bicycle by simply pedalling.
The push assist system cannot be
activated.
Limited assistance with maximum
ECO
efficiency for maximum range
Constant assistance, for long-range
TO U R
tours
Powerful assistance, for sport rides on
S P O R T
mountainous rides and on urban
roads.
Maximum assistance up to high
TU RB O
pedalling frequencies, for sport riding
Table 32: Overview of levels of assistance, standard
eMTB mode is available for Performance Line CX
drives. In eMTB mode, the assistance factor and
the torque are dynamically adjusted depending on
the pedalling force applied to the pedals. If the
pedelec has been configured with eMTB mode,
eMTB mode appears briefly when the SPORT
level of assistance is selected.
Level of assistance
Use
When the drive system is switched on,
the motor assistance is switched off.
The pedelec can be used like a
O FF
normal bicycle by simply pedalling.
The push assist system cannot be
activated.
Limited assistance with maximum
ECO
efficiency for maximum range
Constant assistance, for long-range
TO U R
tours
Optimum assistance on all terrains,
sport
eMTB
start-up, improved dynamics,
maximum perfor-
mance.
Maximum assistance up to high
TU RB O
pedalling frequencies, for sport riding
Table 33: Overview of levels of assistance – eMTB mode
3.6.4.3 Motor power used
The motor power used appears on the screen.
The maximum motor power depends on the
selected level for assistance. A long bar indicates
high power consumption.
MY20H02-12_1.0_12.06.2019
3.6.4.4 Battery level indicator
The battery level indicator displays the pedelec
battery level, not the level for the display internal
battery. You can also see the charge level on the
LEDs on the battery itself.
If the display is removed from its mount, the last
displayed battery level is saved.
Symbol
Meaning
The battery is fully charged.
The battery needs to be recharged.
The LEDs on the battery level indicator have
gone out. The capacity for drive assistance has
been used up and assistance is gently switched
off. The remaining capacity is reserved for
lighting and the display. The screen flashes.
The pedelec battery capacity is sufficient to
provide about two hours more lighting. Other
electrical loads, such as automatic gears and
charging of external devices connected to the
USB port, are not taken into account here.
Table 34: Overview of battery level indicator
Each bar in the rechargeable battery symbol on
the screen represents about 20% capacity.
If a pedelec is used with two batteries, the battery
level indicator shows the charge level for both
batteries.
If both batteries are being charged on a pedelec,
the function display shows the charging progress
for both batteries. You can see which of the two
rechargeable batteries is currently being charged
by the flashing screen display on the rechargeable
battery.
Figure 26: The left battery is currently being charged
Overview
OF
MP H
KM /
37
Advertisement
Table of Contents
