Table of Contents
Advertisement
3.6.4.5 Gear recommendation
Pedalling frequencies higher than 50 revolutions
per minute optimise drive unit efficiency.
However, very slow pedalling uses up a great deal
of energy. You can increase the speed and range
while applying the same force by selecting the
right gear. It is therefore best to follow gear
recommendations.
The gear recommendation function reacts to
excessively slow or excessively quick pedalling
and recommends a change of gear.
The gear recommendation function has to be
switched on in the system settings.
Symbol
Use
Pedalling frequency is too high, a higher gear is
recommended
Pedalling frequency is too low, a lower gear is
recommended
Table 35: Symbols of the gear recommendation function
3.6.4.6 Tachometer screen
The tachometer shows the current speed at all
times.
You can select whether the speed is displayed in
kilometres or miles in the system settings.
3.6.4.7 Function display
The function display shows texts and readings.
Three different types of information are shown:
•
Journey information
•
System settings and data, and
•
System messages.
Journey information
Depending on the type of pedelec, the function
display may show up to seven journey information
items. The displayed journey information can be
switched.
Screen display
Function
C LO CK
Current time
MA X. SPEED
Maximum speed reached since the
last RESET
AVG . SP EED
Average speed reached since the last
RESET
T RI P T IM E
Journey time since last RESET
R ANG E
Estimated range of the available
battery charge
O D O MET ER
Display of the total distance travelled
(cannot be changed)
T RI P D IST AN CE
Distance travelled since the last
RESET
Table 36: Journey information
MY20H02-12_1.0_12.06.2019
Additional journey information
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Screen display
Change
A UT O : O N/ AUT O : O F F This menu option indicates
whether the automatic mode is
switched on or off.
Table 37: Additional journey information
Applies only to Pedelecs with eShift with manual
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Screen display
Change
G E AR
The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 38: Additional journey information
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Screen display
Change
G EA R
The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 39: Additional journey information
Applies only to Pedelecs with eShift with NuVinci
H|Sync/ enviolo with Optimized H|Sync
The following additional functions are available on
the function display:
Screen display
± N UV IN CI CA DEN CE /
± N UV IN CI G EAR
Table 40: Changing the system settings
Applies only to Pedelecs with eShift with Rohloff
E-14 Speedhub 500/14
The following additional functions are available on
the function display:
S CR E E N D I S P L A Y
Change
G E AR
The current gear shift is shown on
the display screen. The new gear
is shown briefly on the screen each
time it is changed.
Table 41: Changing the system settings
Overview
Change
The current gear shift is shown
on the display screen. The new
gear is shown briefly on the
screen each time it is changed.
The standard setting is
± NuVinci cadence.
38
Advertisement
Table of Contents
