Table of Contents
Advertisement
System data
To view all the information on the system being
used and the software, the rider has to call up the
system data.
Screen display
Function
SEARIAL NUMBER DU
Drive system serial number
SEARIAL NUMBER HMI Serial number for control panel
with display
SW VER SIO N H MI
Software version of the control
panel with display
S W V E R S I O N D U
Drive system software version
S W V E R S I O N P P
Battery software version
Table 34: System data, not changeable
System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error.
There is a table of system messages in the
appendix
Figure 23: The left battery is currently being charged
3.6.3.4 Gear recommendation
Pedalling frequencies higher than 50 revolutions
per minute optimise drive unit efficiency.
However, very slow pedalling uses up a great deal
of energy. You can increase the speed and range
while applying the same force by selecting the
right gear. It is therefore best to follow gear
recommendations.
The gear recommendation function reacts to
excessively slow or excessively quick pedalling
and recommends a change of gear.
MY20B01-32_1.0_21.06.2019
The gear recommendation function has to be
switched on in the system settings.
Symbol
Use
Pedalling frequency is too high, a higher gear is
recommended
Pedalling frequency is too low, a lower gear is
recommended
Table 35: Symbols of the gear recommendation function
3.6.3.5 Tachometer screen
The tachometer shows the current speed at all
times.
You can select whether the speed is displayed in
kilometres or miles in the system settings.
3.6.3.6 Function display
The function display shows texts and readings.
Three different types of information are shown:
•
Journey information
•
System settings and data, and
•
System messages.
Journey information
Depending on the type of pedelec, the function
display may show up to seven journey information
items. The displayed journey information can be
switched.
Screen display
Function
CL O CK
Current time
MAX . S PEED
Maximum speed reached since the
last RESET
AVG . SP EED
Average speed reached since the last
RESET
T RI P T IM E
Journey time since last RESET
RA NG E
Estimated range of the available
battery charge
O DO M ET ER
Display of the total distance travelled
(cannot be changed)
T RI P D IST AN CE
Distance travelled since the last
RESET
Table 36: Journey information
Additional journey information
Applies only to Pedelecs with eShift with
Shimano DI2 automatic hub gears
The following additional functions are available on
the function display:
Screen display
Change
A UT O : O N/ AUT O : O F F This menu option indicates
whether the automatic mode is
switched on or off
.
Table 37: Additional journey information
Overview
34
Advertisement
Table of Contents
