Table of Contents
Advertisement
Settings/Registration
Output Tray>
he description in "NOTE" has been changed (description of the third bullet point deleted).
●
If you set <Different Paper Sizes for Output Tray> to <Off>, printing may stop when the message
<Remove the paper from the output tray.> appears. To resume printing, remove all of the paper from
the output tray.
●
If you set both the Different Size Originals and Staple modes, outputs are stapled and collated,
regardless of the Different Paper Sizes settings.
●
This mode can be set when the Staple Finisher-X or Booklet Finisher-X is attached.
Settings/Registration
A NOTE has been added to <Multi-Purpose Tray Defaults>.
<Multi-Purpose Tray Defaults>
(Settings/Registration)
●
You can set the method for selecting the paper to use in the multi-purpose tray. If you always use the same
paper size/type in the multi-purpose tray, it is convenient to register the paper in <Use Preset>.
●
If you use various types of paper in the multi-purpose tray, select <Always Specify>. If you frequently use
multiple types of paper, you can eliminate the procedure for selecting the paper type by registering the
paper types in advance.
●
When the following conditions are met, you can press <Temp. Change Ppr. in MP Tray> on the paper
selection screen of <Copy> and <Access Stored Files> to change the paper size/type to load from the
multi-purpose tray:
- If paper is loaded in the multi-purpose tray
- If this setting is set to <Use Preset>
- If <Paper Feed Mode for Printer Driver Jobs with MP Tray> is set to <Mode A (Prioritize Printer Driver
Settings)>
Basic Operations
Specifying the Output Tray for Preprinted Paper
The description in "Available Functions by Device Configuration and Output Tray" has been changed as shown
below.
Other Changes to the User's Guide
<Function Settings>
<Preferences>
<Paper Settings>
<Preferences>
<Paper Settings>
90
<Common>
<Different Paper Sizes for
Advertisement
Table of Contents
