Table of Contents
Advertisement
5
Configure the settings for the colors you want to reproduce on this machine.
6
Click [OK].
7
If the application you are using has a scaling setting, specify 100%.
8
Click [Print] or [OK].
➠
The chart is printed.
5
Press
(Settings/Registration)
Quality>
<Register Color Profile>
6
Load the respective charts into the feeder stacked so that the 4 sheets from the
other machine are on the bottom and the 4 sheets from this machine are on the top,
and then press <Start Scanning>.
7
When scanning is complete, enter the <Profile Name> and press <OK>.
●
The registration of a profile is completed.
●
You cannot register the name of a profile that has already been registered.
●
The registered profile will be enabled by performing one of the following operations.
●
Press
(Settings/Registration)
●
Restart the machine.
Printing Using a Registered Profile
If you want to print using a registered profile, perform the following operations in the printer driver.
●
To print using a registered profile, you first need to obtain device information from the printer driver. Click
in the [Device Settings] tab in the printer driver properties.
1
Open a document and display the print setting screen of the printer driver.
2
Select the machine and click [Details] or [Properties].
3
Select the [Manual Color Settings] checkbox on the [Quality] tab, and click [Color
Settings].
Changes to Functions
<Adjustment/Maintenance>
<Reproduce Colors from Other Device>.
(Settings/Registration)
(Windows)
50
<Adjust Image
<Apply Set. Changes>
<Yes>.
Advertisement
Table of Contents
