Table of Contents
Advertisement
Reproducing Colors from Another Machine
You can register colors to be reproduced that are used on another Canon machine. To register a profile, stack the
charts printed from this machine and the other machine, and scan them from the feeder of this machine. This function
may not be available on some models, such as those not equipped with feeders.
●
If you do not set the scaling correctly when printing the charts of this machine and the other machine, an
error message appears when you scan from the feeder. In addition to the printer driver setting, if the
application you are using has a scaling setting, specify 100% for printing.
1
Download "Color Chart for Reproduce Colors from Other Device" for the machine
chart from the online manual Web site.
2
Print a chart with the machine.
1
Open a chart and display the print setting screen of the printer driver.
2
Select the machine and click [Details] or [Properties].
3
On the [Basic Settings] tab, select [A4] or [Letter] for [Page Size] and [1-sided Printing] for [1-sided/2-
sided/Booklet Printing].
4
Select the [Manual Scaling] check box on the [Page Setup] tab and set it to 100%.
5
Select the [Manual Color Settings] checkbox on the [Quality] tab, and click [Color Settings].
6
On the [Matching] tab, select [Do Not Use] in [Matching Mode], clear the [Application Color Matching
Priority] check box, and then click [OK].
7
Click [OK].
8
If the application you are using has a scaling setting, specify 100%.
9
Click [Print] or [OK].
➠
The chart is printed.
3
Download "Color Chart for Reproduce Colors from Other Device" for the other
machine chart from the online manual Web site.
4
Print a chart on the other machine showing the colors to be reproduced.
1
Open a chart and display the print setting screen of the printer driver.
2
Select the other machine and click [Details] or [Properties].
3
On the [Basic Settings] tab, select [A4] or [Letter] for [Page Size] and [1-sided Printing] for [1-sided/2-
sided/Booklet Printing].
4
Select the [Manual Scaling] check box on the [Page Setup] tab and set it to 100%.
Changes to Functions
49
Advertisement
Table of Contents
