Introduction Product Overview Product Description This product is a ceiling mount exhaust fan with a metal casing. This fan has rotating parts and personnel must exercise safety precautions during installation, operations, and maintenance. Intended Use Use this product only in the manner intended by Fantech. If you have any questions, please contact a Fantech representative.
• Never place a switch where it can be reached from a tub or Safety shower. • Do not block the air intakes or exhaust. Safety definitions • Do not mount this product in an outdoor location. Warnings, cautions and notes are used to point out specially •...
Installation To Mount the Product Caution Do not mount this product in a wall. Note: This product is designed for installation in ceilings up to a 12/ Hanger Bars 12 pitch (45 degree angle). A Screw B Screw Note: To make sure the product can be set correctly anywhere be- tween the framing, hanger bars have been supplied.
To Attach the Duct Caution To keep pressure losses to a minimum, and promote sufficient airflow, observe the following: • Where possible, use short and straight duct run lengths. • Do not install the product with existing duct. • Do not install smaller than recommen- ded duct on the product.
Electrical connection To do before the electrical connection • Make sure that the electrical connection agrees with the product specification on the motor name plate. • Make sure that the environment for electrical connection is clean and dry. • Make sure that the wiring diagram that is included with the supply of the product agrees with the terminals in the con- nection box.
Page 8
Legend for Diagram English Terminology Meaning LIGHT SWITCH Light Switch FAN SWITCH Fan Switch LINE IN Line In SWITCH BOX Switch Box UNIT Unit LIGHT Light POWER SUPPLY 120V AC 120 Voltage Alternating Current Power Supply FAN RECEPTACLE Fan Receptacle LIGHT RECEPTACLE Light Receptacle WIRE PANEL...
RCS80L BLACK (BLK) WHITE (WHT) BLUE (BLU) GROUND (GRD) WIRE LIGHT UNIT PANEL SWITCH SWITCH SWITCH BOX RECEPTACLE RECEPTACLE LIGHT RECEPTACLE POWER SUPPLY 120V AC Operation Maintenance To Start the Product Warning Set the installed switch(es) in the OFF Make sure that 120 volts of Alternate Current (AC) wiring position before you do the maintenance are attached to the product.
Technical data Voltage, Motor Power, Frequency Refer to the mo- tor nameplate on Technical Data Overview the blower assembly. Motor data Refer to the mo- tor nameplate or the technical documentation from the motor manufacturer. Product Dimensions Note: Dimensions are given in inches (mm). bathfan Recessed 4 (102) 6–1/2 (165)
Need help?
Do you have a question about the fantech RCS80L and is the answer not in the manual?
Questions and answers