Table of Contents
Advertisement
Available languages
Available languages
Cleaning
Remove excess clutter from floors before
cleaning. Use your robot frequently to maintain
well-conditioned floors.
EN
• Your robot will automatically explore and clean your home. It
will return to the Home Base at the end of a cleaning job and
whenever it needs to recharge.
• To send the robot back to its Home Base, tap
ring pattern will indicate that the robot is seeking the Home
Base.
• When your robot detects an especially dirty area, it will go
into Dirt Detect™ mode, moving over the area multiple times
until it senses that the area has been sufficiently cleaned.
The light ring indicator will flash blue.
• Tap
to spot clean a designated area. The robot will
spiral outward about 3 feet (1 metre) and then spiral
inward to end where it started. The light ring indicator
will show a blue spiral.
When the robot senses its bin needs to be
emptied, the light ring indicator will illuminate
in a red sweeping motion toward the rear.
3
For more information, visit global.irobot.com
Just Press CLEAN
Tap to Start/Pause/Resume
Hold for 3 seconds to end a job
. A blue light
Troubleshooting
• Your robot will tell you something is wrong by playing an audio alert and
turning the light ring indicator red. Press CLEAN for details. Further support
and instructional videos are available in the iRobot Home App.
Red Light Ring
Low battery. Please charge.
• If you are unsure if the robot is finished or paused, consult the iRobot Home
App to check on its status.
Battery Safety & Shipping
For best results, only use the iRobot Lithium Ion Battery that comes with your
robot.
WARNING
: Lithium ion batteries and products that contain lithium ion batteries are
subject to stringent transportation regulations. If you need to ship this product for
service, travel or any other reason, you MUST follow the below shipping instructions.
• Battery MUST be turned off before shipping.
• Turn off the battery by removing the robot from the Home Base and holding down
for 10 seconds. All indicators will turn off.
• Package the robot securely for shipping.
• If you need further assistance, contact our Customer Care team or visit global.
irobot.com.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ROOMBA i4 and is the answer not in the manual?
Questions and answers
I need to replace the plug for roomba i4
The context does not provide specific instructions on replacing the plug for the iRobot Roomba i4. However, it suggests inspecting the power cord for visible damage and ensuring it is securely connected. If the power cord or dock is damaged, consider ordering a replacement from iRobot or a verified parts retailer.
This answer is automatically generated
Light comes on and hear chime, but it doesn't start. Once today it said error 43. I've moved the docking station and its charged but won't take off!
Your iRobot Roomba i4 may show a light and chime but not start because it has detected an issue. A red light ring and audio alert indicate a problem. To understand the specific issue, press the CLEAN button for details.
Error 43 is not explained in the provided context.
For further help, check the iRobot HOME App.
This answer is automatically generated