Table of Contents
Advertisement
3. USING THE PHONE
3.1 Battery-saving mode and
locking the screen
If you don't use your phone for a certain period
of time, the screen will switch to battery-saving
mode and go black. You can reactivate the screen
by pressing the on/off button briefly.
Locking the screen can also protect your phone
from unintentional input on the touchscreen.
Locking the screen manually
›
• Press the on/off button briefly.
• The screen will go black and lock,
and the phone will beep. The screen is now
protected from any unintentional input.
Setting the screen to lock automatically
›
You can choose from the following device security
options in Quick settings > More settings >
Security settings > Biometrics and password:
• Screen lock
· None
· Swiping
· PIN: Enter a code of your choice.
• Fingerprint function: You can save up to five
fingerprints.
• Face unlock
EN·12
3.2 Buttons on the phone
On/Off button with fingerprint sensor
›
• Hold the on/off button down for at least 2 seconds
to turn the phone on or off.
• Press this button briefly to wake the phone from
or put it into battery-saving mode.
• If you've selected and set up the fingerprint
security function, this button will act as the
fingerprint sensor.
• Place one of the fingers whose prints you've stored
on the button to wake the phone from battery-
saving mode.
Volume buttons
›
The volume buttons on the side of
your phone allow you to adjust the
volume, mute the phone when it is
ringing or mute the alarm clock.
1
Audio profiles for ringer
volume:
Ringer sounds for calls and
notifications
Calls and notifications trigger an alarm
accompanied by vibration
Alerts for calls and notifications are muted
2
Slide controller for media volume
3
Volume control button:
Slide controller for Media volume, Call volume,
Ringtone/Notification volume and Alarm
volume
You'll find the emporia silent mode in Quick settings
(see page 26).
1
2
12:30
12:30
12°C
12°C
21.04.
21.04.
3
Advertisement
Table of Contents
