Step 3. Secure Oem Delivery Port - Vendors Exchange BEVMAX Installation Manual

3.A) Secure the OEM delivery port to the
Mounting bracket on the door. This
will be used to secure the Delivery
Port and OEM board.
3.D) Secure the bottom of the OEM
delivery port and turret electronic
housing bracket to the bottom
delivery port mount with (2) nuts.
3.F) Secure the door switch(s) and
bracket that were removed earlier
using a 7/16" nut driver. Ensure the
switch is shifted all the way back.
INSTALL NEW DOOR
Step 3: Secure OEM Delivery Port
3.B) Secure the top of the OEM
delivery port to the top delivery
port mount with (2) nuts.
3.E) Secure the OEM delivery board and cover to the turret electronic housing
bracket. Ensure the exposed wires are nested in the channels so that it will
3.G) Verify that the correct Switch contact
bracket is installed. Pictured above is
switch contact bracket (VE1019646)
which corresponds to the door switch in
step 3.F
VE1021164 - BEVMAX - MEDIA PANEL INSTALLATION MANUAL
www.veii.com
3.C) Secure the turret electronic
housing bracket to the lower
delivery port mount.
clip into place and hold.
3.H) If the door switch doesnt match
the one in step 3.F , install switch
contact bracket (VE1019552)
instead.
8