INSTALL NEW DOOR
Step 1: Secure BevMax- Media Door
1.C) Mount top hinge of the new door to
1.A) Place (2) .688 ID x 1.312 OD x.150
1.B) Place the new curve BevMax panel
the cabinet with the (2) 1/4-20 Carriage
THK steel bushings (VE1017457) over
onto the bottom hinge stud.
Bolts (VE1020754) and (2) 1/4-20 Keps
top the bottom hinge stud. Add an
Nuts (VE7358).
additional (1-2) .313 ID x .75 OD x .066
THK washer (VE1017455), will depend
on stud.
1.D) Secure the bottom hinge stud with
1.E) Open and close the door, verifying lock bar functionality. If necessary,
the included 1/4-20 Hex nut with
adjust the cabinet lock interface brackets for smooth operation.
nylon insert (VE6023M).
Step 2: Install Payment Systems
2.A) Secure the payment Systems that you removed earlier into their respective locations. This needs to be done prior to
installing the OEM delivery port, as they sit behind it.
VE1021164 - BEVMAX - MEDIA PANEL INSTALLATION MANUAL
www.veii.com
7