Remove Door; Step 1. Remove Existing Payment Systems; Step 2. Remove Oem Delivery Port - Vendors Exchange BEVMAX Installation Manual

REMOVE DOOR

WARNING
! !
To prevent personal injury and equipment damage, turn machine off and disconnect electrical cord from the wall outlet
before installing door. Failure to do so could result in electrical shock.
Step 1: Remove existing Pay Systems
1.A) Unplug machine from power outlet 1.B) Disconnect and remove any payment systems currently in the
to prevent electrical shock. door, set aside for future use.
Step 2: Remove OEM Delivery Port
2.A) Remove plastic OEM board cover, exposing the board underneath. Remove the two nuts securing the electronic housing bracket,
then remove the bracket so that it can be installed later onto the new door.
2.B) Remove screw on top of the OEM delivery port marked in the picture above.
2.C) Remove the (4) nuts securing the OEM
Remove the upper housing to reveal the screws that are used to secure the
delivery port to the door. Set aside for
OEM delivery port to the door.
future use.
VE1021164 - BEVMAX - MEDIA PANEL INSTALLATION MANUAL
5
www.veii.com