Advertisement
Completing the cleaning
Switch off the pressure washer with the operating switch (5) and press "OFF" to
unplug the plug.
Turn off the water supply and remove the device from the water drain.
Operate the spray gun (11) until the device is no longer pressurized.
Lock the trigger (19) of the spray gun with the locking system (18).
Disconnect the high-pressure hose from the gun by pressing the locking button
(20) and pulling the hose downwards from the gun.
Roll up the whole high-pressure hose onto the reel (2).
Store the device in a safe place, temperate place out of reach of children.
Before a long period without use and winter storage, operate the device for
approx. 5 seconds without draining water and without connecting the high
pressure hose. The pump is thus emptied of as much residual water as possible
and the risk of damage due to the possible presence of frozen water within the
device is nearly inexistent.
Care and Maintenance
Before carrying out any maintenance and repair work, disconnect the power
plug.
Clean the housing only with a dry cloth and do not use detergents that could
attack the housing.
Remove the dirt filter from the water connection (7), clean it under water and
replace it.
Advertisement
