Advertisement
Multiple jet nozzle
Adding detergent is only possible in low pressure operating mode.
Push the nozzle sleeve (22) forwards or backwards to switch the high pressure
cleaner from the high pressure operating mode to the low pressure operating
mode and vice versa.
To add detergent to the washing water, push the nozzle sleeve (22) forward and
bring it to the stop.
When you trigger the spray gun, the detergent will be automatically mixed with
the wash water.
To switch to high pressure operation, pull the nozzle sleeve (22) towards the gun,
until it stops.
After switching from the low pressure operating mode to the high pressure mode,
and when the detergent tank is full, detergent may still run out for a few
moments.
By turning the nozzle for the nozzle (22), you can choose between the linear jet
(23) and the round jet (24).
Cleaning operation
Start possibly by cleaning the object in high-pressure operation mode to remove
most of the dirt.
Spray the detergent on the dry surface to be cleaned and let it act for a few
moments (do not let it dry!).
Rinse with a high-pressure jet to remove the dissolved dirt.
Linear jet nozzle
The nozzle (14) produces a rotary linear jet. Thus, cleaning of large wall and floor
surfaces is faster.
Proceed first, as described above in the section ("Before switching on".
Mount the nozzle (14) in the lance (11).
By actuating the trigger (19) a rotary linear jet occurs.
By moving the spray gun here and there, you can, for example. effectively remove
algae or moss from outdoor surfaces.
Advertisement
