1. INTRODUCTION Attention: Read through the complete manual prior to the initial use of your pressure washer. 1.1. Carbon monoxide warning. 1.1.1. Carbon monoxide is a colourless and odourless gas. Inhaling this gas can cause death as well as serious long term health problems such as brain damage. The symptoms of carbon monoxide poisoning can include but not limited to the following;...
2. PRODUCT IDENTIFICATION 2.1. Pressure Washer 2.1.1. If you need to contact an authorised dealer or customer service for information on servicing, always provide the product model and identification numbers. 2.1.2. You will need to locate the model and serial number for the machine and record the information in the places provided below.
Page 5
Do not use pressure washer in enclosed space without ventilation. Carbon Monoxide Kills 3.3. Safety rules. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Page 6
TOXIC FUMES EXPLOSION FIRE ELECTRIC SHOCK SLIPPERY KICKBACK HOT SURFACE FLYING OBJECTS FALL FLUID INJECTION MOVING PARTS READ MANUAL 3.3.5. WARNING Risk of electrocution, contact with power source can cause electric shock or burns. 3.3.6. WARNING Fuel and its vapours are extremely flammable and explosive. 3.3.7.
Page 7
spill. 3.3.7.3.2. DO NOT spray flammable liquids. 3.3.7.4. When Transporting or Repairing Equipment 3.3.7.4.1. Transport/repair with fuel tank EMPTY or with fuel shutoff valve OFF. 3.3.7.4.2. Disconnect spark plug wire. 3.3.7.5. When Storing Fuel or Equipment with Fuel in Tank 3.3.7.5.1.
Page 8
3.3.10. WARNING Use of pressure washer can create puddles and slippery surfaces. 3.3.11. WARNING Kickback from spray gun can cause you to fall. 3.3.11.1. Operate pressure washer from a stable surface. 3.3.11.2. The cleaning area should have adequate slopes and drainage to reduce the possibility of a fall due to slippery surfaces.
Page 9
3.3.13.3. Keep at least 5 feet (1.5 m) of clearance on all sides of pressure washer including overhead. 3.3.14. WARNING Risk of eye injury. Spray can splash back or propel objects. 3.3.14.1. Always wear safety goggles when using this equipment or in vicinity of where equipment is in use.
Page 10
3.3.16. WARNING Starter and other rotating parts can entangle hands, hair, clothing, or accessories. 3.3.16.1. NEVER operate pressure washer without protective housing or covers. 3.3.16.2. DO NOT wear loose clothing, jewellery or anything that may be caught in the starter or other rotating parts.
Page 11
3.3.19.5. DO NOT operate pressure washer above rated pressure. 3.3.19.6. DO NOT modify pressure washer in any way. 3.3.19.7. Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there. 3.3.19.8.
1. Nozzles 2. High Pressure 3. Pressure 4. Water Inlet 5. High Pressure Outlet Detergent, 0°, Hose Connect Control Knob Connection for Connection for 15°, 40° & Turbo Varies pressure one end to water garden hose. high pressure Nozzle: for high pump and the of high pressure hose.
5.3. Unpack the Pressure Washer 5.3.1. Remove the parts bag, accessories, and inserts included with pressure washer. 5.3.2. Remove machine from box. 5.3.3. Ensure you have all included items prior to assembly. 5.4. Attach Handle 5.4.1. Place handle (A) onto handle supports (B) connected to main unit.
6.1. Follow the Checklist Below Prior to Using the Machine Each Time 6.1.1. Check to ensure the engine oil is at the proper level. 6.1.2. Use SAE 15W40 Oil 6.1.3. Check the 2 handle knobs to ensure they are tight and will not vibrate loose. 6.1.4.
Page 16
7.4. Choose desired nozzle, pull back nozzle extension collar, insert nozzle and release collar. Tug on nozzle to make sure it is securely in place. See Nozzle Selection Section. 7.5. Uncoil high pressure hose and attach quick connect end of hose to base of spray gun.
Page 17
7.10. Take a look at all connections to make sure there are no leaks or loose connections. 7.11. IMPORTANT If drawing water from a barrel, it is advisable to have a gravity- fed supply. Use ONLY cold water (less than 38°C/100°F). 7.12.
Page 18
7.19.1. NEVER pull starter cord without first relieving spray gun pressure. 7.19.2. When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback. 7.19.3. After each starting attempt, where engine fails to run, always point spray gun in safe direction and squeeze spray gun trigger to release high pressure.
7.22.3. Keep at least1.5m (5 feet) of clearance on all sides of pressure washer including overhead. 8. SHUTTING DOWN YOUR WASHER 8.1. How to Shut Down Your Pressure Washer 8.1.1. Release spray gun trigger and let engine idle down. 8.1.2. Turn the engine switch to the OFF position. 8.1.3.
Page 20
9.2. WARNING The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation. 9.2.1. NEVER change nozzles without the trigger safety lock being engaged on the spray gun.
Page 21
9.5.5. NOTE This washer will only draw soap with the black soaper nozzle. The White, Red, and Yellow nozzle will not draw soap. 9.6. Make sure black nozzle is installed. 9.7. Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump.
10. TROUBLESHOOTING 10.1. If you are experiencing a problem that is not listed in this chart, or have checked all the possible cause listed and you are still experiencing the problem, contact Aftersales on 01646 687880. 10.2. Petrol engine trouble shooting. Problem Cause Correction...
Problem Causes Correction Using wrong nozzle Insert black soaper nozzle Siphon hose or filter is plugged Unplug siphon hose No low pressure detergent delivery Check supply hose, faucet and inlet water filter. Must be connected to Restricted or insufficient water water source which provides 6GPM supply.
Page 24
storage. Run the engine for a short time to circulate stabilizer throughout the fuel system. Engine and fuel can then be stored up to 24 months. 11.4.3. If petrol is drained, the use of a fuel stabilizer in the storage container is still recommended to maintain freshness.
12. PARTS BREAKDOWN NOTE Pressure washer HYW3100P (uses same pump and engine as the HYW2500P but with traditional style frame like HYW4000P). NOTE Pressure washer HYW3100P2 (which uses the same pump and engine as the HYW3000P but with the traditional style frame like the HYW4000P).
13. MAINTENANCE 13.1. The user should take the table below into consideration make sure the machine is kept in perfect working condition. Page Rev 7 HYW2500P_HYW3000P_HYW3100P_HYW3100P2_HYW4000P Combined user manual Rev 7.pdf 16/12/2015 11:43:51...
Page 36
13.2. NOTES * = More often than in schedule if the unit is used in dusty conditions. 13.2.1. CAUTION Only use parts supplied by the manufacturer in order to reduce the risk of damage to the machine. 13.2.2. WARNING Before servicing ensure that the machine is completely switched off and ensure that there is good ventilation in the area.