Assembly / Disassembly; Assembling The Meat Grinder - Silvercrest SFW 250 B1 Operating Instructions Manual

Assembly / Disassembly

CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin fi lm of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
fi rst time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic compo-
nents.

Assembling the meat grinder

Unfold the fold-out side. There you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw
2) Place the spring
3) Then fi t the cross blade
spring 7:
WARNING! RISK OF INJURY!
► The cross blade
CAUTION - PROPERTY DAMAGE!
► The appliance will be damaged if the cross blade
way around!
4) Select the appropriate cutting disc
sausage disc w that you do not immediately need can be stored in the small
compartment on the appliance (Fig.
To do this, slide the cover back to open the compartment. Place the two unused
cutting discs into it and then close the compartment with the cover.
SFW 250 B1
6 in the meat grinder casing 5.
7 onto the transport screw 6.
8 on so that the sharp side points away from the
8 is very sharp! Risk of injury!
8/sausage disc w. The cutting discs 8/
).
8 is inserted the other
GB
5