Assembly/Disassembly
CAUTION! PROPERTY DAMAGE!
►
All accessories are coated with a thin film of oil to protect them from
corrosion . Therefore, carefully clean all of the parts before using the
appliance for the first time, as described in detail in the chapter "Cleaning" .
After subsequent usage, always apply a light coating of cooking oil to the
metallic components .
NOTICE
►
Before using for the first time, remove the protective foil from the control panel .
Assembling the meat grinder
Unfold the fold-out side . There you will find the step-by-step illustrations for
assembling the appliance .
1) Coat all metal parts with cooking oil .
2) Place the transport screw 7 in the meat grinder casing 6 .
3) Place the spring 8 onto the transport screw 7 .
4) Then fit the cross blade 9 on so that the sharp side points away from the
spring 8 . Ensure that the square opening in the cross blade 9 is placed
correctly on the square axle .
WARNING! RISK OF INJURY!
►
The cross blade 9 is very sharp! Risk of injury!
CAUTION! PROPERTY DAMAGE!
►
The appliance will be damaged if the cross blade 9 is inserted the other
way around!
5) Select the appropriate cutting disc 0/sausage disc e .
■
6
│
GB │ IE │ NI │ CY
SFW 350 E5