Table of Contents
Advertisement
Installation instructions of anti-collapse chain
● In order to prevent accidental collapse of indoor unit, please install the
anti-collapse chain.
Installation steps:
1. Remove the screw of anti-collapse hole at the top cover of indoor unit
(see fig. 3);
2. Take out the anti-collapse chain and put it into the anti-collapse hole, and then
tighten it with screw (see fig. 4);
3. Fix the other end of anti-collapse chain on the wall with screw (ST4.2X38)
(see fig. 4).
Remove the screw at the top cover
● The above fig may be different from the actual products; please refer to the
actual products.
Put this end into the hole
and then tighten it with screw
Anti-collapse hole
Fig. 3
Fix the other end on the wall with screw
Fig. 4
39
Wall
Indoor unit
Advertisement
Table of Contents
