Table of Contents
Advertisement
Button's introduction
Note:
This series unit adopts touch buttons. You only need to touch the buttons slightly.
1
ON/OFF button
●
Press this button to turn on or turn off the unit.(Note: Under X-FAN mode,
press this button to turn on the unit directly.)
2
MODE button
● Every time press this button, the mode will switchover in cycle among.
(Note: Cooling only unit won't accept heating operation signal. For cooling only unit,
pressing MODE button under FAN mode will skip heating mode and enter cooling
mode.)
3
FAN button
● Press this button and then fan speed can be selected and displayed in the
sequence as below:
(low)
(Note:Only low fan speed is available for dry mode. Fan speed can't be adjusted
under dry mode. Turbo cannot be set in FAN mode.)
4
FUNCTION button
Under on status, press Function button to switch between timer and auxiliary
●
heating function setting (auxiliary heating can be set only in heating mode). When
timer or auxiliary heating icon is blinking, it means this function can be set. Press
"▲" or "▼" button to set function. If there's no operation change within 5s after
setting is finished, the function setting will be confirmed. Or press Function button
again to exit or confirm the function.When the function is selected through Function
button, if the unit is not turned off and no remote control signal is received within
2min, pressing Function button again to circulate from the previous set function.
After 2min or the unit is turned off or remote control signal is received, pressing
Function button again to circulate from timer icon. (Note: Only when the unit is
under heating mode and with auxiliary heating function, auxiliary heating function
can be turned on or off through Function button.)
●
Under off status, if the unit is in X-FAN status, press Function button to turn off the
unit directly; if the unit is not in X-FAN status, press Function button to set timer ON.
COOLING
DRY
HEATING
FAN
(medium)
(turbo)
9
(high)
Advertisement
Table of Contents
